PalmInfocenter AvantGo channel not displaying properly

I have been happily reading the PalmInfocenter AvantGo channel for many years, on many different devices. For the last year or so I've been reading it on a Treo 700p. For the last two weeks or so, all of the PalmInfocenter articles have been loading such that I have to keep scrolling right & left to read the full lines. I.e. the screen is 2 inches across, and the lines are 4 inches across. Can this be fixed? Is there something I can do on my end to fix this?

Thanks!

John F
Montclair NJ

You could access the mobile site directly in Blazer, and it should display normally:

http://www.palminfocenter.com/mobile/

I will look into the avantgo issue, I haven't used the app in years, so I will see what's going on there.

It would be really nice if the Avant Go issue could be fixed. I don't get a signal inside my building, so most of the workday Blazer is not available to me. I like to sync up Avant Go in the morning, and then when I have little bits of time I like to read my various Avant Go channels offline.

Thanks!!!

John F

I'm trying to sort this out. I confirmed the issue on my centro, I was able to remedy it by hitting refresh, but that's not going to work unless you have a signal.

I'm not exactly sure what's causing it, so I'm going to try and get in touch with someone from AvantGo to see if they know why this is happening. I'll let you know what I find out.

I think the AvantGo issue has been fixed.

Can you please try the channel again and let me know if it is still not displaying correctly.

Thanks,
-Ryan