Rhinoskin Hardcases for m500 and Edge
RhinoSkin is now offering aluminum hardcases for both the m500 series and the Visor Edge. These are both slider cases, which means the cover slides under the base to save space. These are made of 100% anodized aluminum with a scratch-resistant finish. Their rigid exteriors and Neoprene interiors help protect the handheld from shocks. The m500 version is $50 and the Edge one is $60.
The m500 series version is 4.7" x 3.3" x 0.6" and weights approximately 2.9 oz It offers an opening above the Palm's infrared port so it can be used without removing the Palm from its case.
The slider case for the Edge is 5" x 3.25" x 0.75" and weighs about 4 oz It allows for easy stylus access.
On the Web:
Article Comments
(37 comments)
The following comments are owned by whoever posted them. PalmInfocenter is not responsible for them in any way.
Please Login or register here to add your comments.
Comments Closed
This article is no longer accepting new comments.
RE: Gotta Make it in Titanium!!!
russell.hicks1@worldnet.att.net
RE: Gotta Make it in Titanium!!!
for all the specs. It is a replacement shell for the plastic housing of the TRGPro. I keep the TRGPro itself in a Rhinoskin Ti-Slider. Metal all the way!!!
Leather Zippered Case from Palm
Thanks!
RE: Leather Zippered Case from Palm
RE: Leather Zippered Case from Palm
RE: Leather Zippered Case from Palm
The leather is supple, and it does provide a pillow of protection. Like I said, it's not the slim leather case, and the case does add some bulk, but it looks stylish, and, IMHO, protects the Palm reasonably well.
--
Bill Lehecka
http://www.oldmatador.com/letterman/
Scratch resistant?
Has the finish changed since earlier versions of the aluminum case? How big of a problem is this? Any comments are appreciated.
RE: Scratch resistant?
RE: Scratch resistant?
Stylus removal while in case…
RTFA
m505 snug fit?
Also, from the looks of the the picture, it doesn't seem like the m505 stylus can be easily accessed while in the case. Appreciate any comments from those who know. Thanks.
RE: m505 snug fit?
RE: m505 snug fit?
My III series neoprene has become flattened over time and it is not a very tight fit any more. I and others I have seen post have to be careful that you don't tip the case when it is opened as the Palm is liable to fall right out of the case. That said, fortunately it has not ever happened to me.
Not a problem that I consider to be too bad as I am usually holding the case using the Palm when it is open and I am not to prone to slinging it around.
For me the Ti-Slider is one of my favorite two cases for my trusty TRGPro.
Re: Better Cases
fortunatly i got one free with my purchase (another office depot plus). but first, in no way is this case a "slim" case.. its bulky.. its like carrying a tank in your pocket. not to mention in the front where there is a place to put 4 little expansion cards... not such a good idea. as its made alittle scratch on the my screen. case engineers!!! didn't you think about this?
the zippered case looks alittle better... i had one on order from palm, but just like my pre-order for my m505 i canceled it and am betting on the stores getting it before they do. plus i think i want to see the case before i buy it this time.
i'm also curious about other case companies that have the potential to offet the ultamate case;
covertec.com had a nice wrap style case called 'the cobra'. i used it with my palm IIIc. sure its only got an elastic band to hold credit cards and such... but with alittle enuneuity i made nice looking.
rhinoskin.com claims to a nice hard shell case with some benefits of a wallet like parts. although they have not set a date.
anyway, hope this helps or adds to the chat... and don't even get me started on compatable stylus/pens that fit into the side of the 500/505. anyone know if there is one that fits?
late!!! 'e'
RE: Better Cases
I Called Asking If They Were Going To Make A Model For My Palm 500. They Said In About 3 Months We Should See A Few.
Hope This Helps
gb
Re: Better Cases
> fit into the side of the 500/505. anyone know if there is one that fits?
The ttools SLIMpoint fits very well.
---
News Editor
Palm Infocenter
RE: Re: Better Cases
How well does the ttools stylus fit in the m505? Is it a snug fit or does it seem to be more of a makeshift fit? Would you suggest buying this now for a pen/stylus combo or waiting for new styli to hit the market?
Thanks,
Jeff
Anyone get the new rhino aluminum case yet?
Check out E&B Cases
They just released their new cases for the m500 series. I had one for my IIIC and really liked it. Thought this might give a few more options.
Re: Rhinoskin Hardcases...
RE: Re: Rhinoskin Hardcases...
I have the Rhinoskin for the palm V and you can NOT close the case all the way with the palm 505. If you have it in your dress shirt pocket the palm will turn on and run down the battery. I like the case, but hope they are not trying to pass a cheap fit off.
If you remember there were A LOT of complaints about the rhinoskins when they first came out, fit and finish, the liner etc. I even tried removing some of the liner to get it to fit, no dice. I will wait for the reviews!!!
WHY METAL
[ No Subject ]
Backpocket?
RE: Backpocket?
By the way, I am left handed so I have the Palm attached to the case by using the right sided stylus silo. The left hand side of the unit has no stylus made for it yet. I do use other pen/stylus anyway (ie the Tornado 51 Data pen)
Also, I have dropped it inadvertently already and no problems. Whew!! Since the unit is held and attached to stylus silo, it didn't move at all.
I hope this helps!
RE: Backpocket?
But... The *molded* hardcase models for the Palm V do NOT work with the M505. I just bought a M505 (which I love) and although it fits on the rail, the case won't close. I suspect that a M500 will fit because it is slightly thinner.
The Rhinoskin Molded hardcases are the absolute best cases for PDA's. I wish that they were available for the M505 right now - I worry that my M505 will break when I forget that I have it in my pants pocket.
BTW - Palm's "Hardcase" should be pulled from the market. It's plastic crap that failed to protect my Palm V from a light blow. Dented the case and broke the Palm's display.
Cheers,
Craig
clip on belt case m505
thanks
RE: clip on belt case m505
Cheap Aluminum Case for M500/ M505!
RE: Cheap Aluminum Case for M500/ M505!
RE: Cheap Aluminum Case for M500/ M505!
The Hard Truth and other Palm Stuff
For those of you out there who didn't know this already, I have some good news. If you use the WriteRight screen protectors, then you will be happy to know that the protectors for the Palm Vx will perfectly fit the m500/505 series. I have personally tried this with both and they not only fit, they actually cover it better since the screen seems to be about half a milimeter smaller all around.
PalmPowered
Power Up!
Latest Comments
- I got one -Tuckermaclain
- RE: Don't we have this already? -Tuckermaclain
- RE: Palm brand will return in 2018, with devices built by TCL -richf
- RE: Palm brand will return in 2018, with devices built by TCL -dmitrygr
- Palm phone on HDblog -palmato
- Palm PVG100 -hgoldner
- RE: Like Deja Vu -PacManFoo
- Like Deja Vu -T_W
Gotta Make it in Titanium!!!
I am wavering back and forth for my upgrade between the 505 and the 330. Using the Ti-Slider I have now for the 330 is one of the things that has me in favor of the 330 over the 505.
If they make this case for the 505 in Titanium, I may have a more difficult decision to make.